Select Inspection Data - SAKI BF-Sirius Manual

3.4 Select Inspection Data

Step1: Press Select Data button on the tool-bar or select File > Select Data from the menu-bar.
Step2: The dialog shown in Figure 3-19 appears.
OK
Cancel
Step3: The dialog shown in Figure 3-20 appears.
For default setting, save the inspection data into D:\BF1\BF1DATA.
To save another destination, check Change destination to save inspection data and specify
the directory to save.
NOTE
FFFure 3-18
Press if you backup the data in E: drive.
Press if you do not prefer to backup the data in E: drive.
FFFure 3-19
Recommend to save the inspection data either make the new data or modify the data.
FFFure 3-20
Select Data
Backup Confirmation
Save Inspection Data
Operation Manual
BF-Sirius
I-15