Step4:
The dialog shown in Figure 3-9 appears. Press
position.
3.2.4 Check before Start Inspection
Before starting inspection, check the followings.
If any problem occurs, please contact Saki Corporation or our representatives.
•
The power lamps of the machine and the PC lights on.
•
There is neither smoke nor a unusual smell.
•
There is no abnormal noise at the time of system activation.
•
The inspection software starts normally.
FFFure 3-9
Returning to the Origin
Operation Manual
OK to return the scan table to the origin
BF-Sirius
I-11