Setting Up The Projector Head; Leveling The Projector - Christie Mirage SST Installation And Setup Manual

Hide thumbs Also See for Mirage SST:

Table of Contents

e) Ensure a qualified electrician connects the AC power to the laser illumination source.

3. Set up the chiller unit (on page 25).

4. Perform initial system start-up (on page 36) or turn on the system (on page 38).

5. Calibrate the lens motor (on page 41).

6. Align the image (on page 42).

a) Adjust the offset (on page 43).

b) Adjust the boresight (on page 44).

c) Adjust the fold mirror (on page 45).

d) Optimize the integrator zoom and focus (on page 46).

e) Adjust the DMD convergence (on page 48).

Align the image with lens zoom and focus (on page 50).

g) Run Auto Setup to optimize display settings (on page 50).

7. Configure Mirage SST to work with Christie Link (on page 50).

Setting up the projector head

1. Position the projector as perpendicular to the screen as possible, even if significantly above the

screen center.

When a particularly short throw distance combines with a wide screen, you may have to forfeit

some aim and stay more perpendicular to the screen. In such cases, some lens offset can

reduce the keystone distortion.

For information on positioning the projector in a rigging frame, refer to the Assembling the

Precision 1 Rigging Frame (P/N: 020-102719-XX) or Upgrading the Boxer Rigging Frame (P/N:

020-102746-XX) instruction sheet.

2. Level the projector (on page 23) as required.

3. Install the projection lens (on page 24).

4. If required, connect the Ethernet cable (on page 55) from the Ethernet port on the projector

head to the input source.

5. Connect the projector head to AC power (on page 25).

Use the projector feet to level the projector.

1. To adjust the vertical position of the projector, extend or retract the adjustable feet on the

bottom of the projector using the adjustable knobs on the feet.

Mirage SST Installation and Setup Guide

020-102956-01 Rev. 1 (06-2019)

Installation and setup

Table of Contents