Adjusting The Fold Mirror - Christie Mirage SST Installation And Setup Manual

6. To focus the right boresight guide, adjust the green boresight screw.
7. To focus the left boresight guide, adjust the yellow boresight screw.
8. To continue to refine the focus, repeat steps 5 to 7.
9. Before adjusting the stabilization screws, close the shutter.
10. To maintain the adjustments, lock the stabilization screws.
When locking the screws, start with the top stabilization screw and turn it so it just touches the
base. Repeat for the other two stabilization screws. Continue to adjust the locking screws until
they are tight.
11. Open the shutter.

Adjusting the fold mirror

Fold mirror adjustment must be completed by trained personnel.
Notice. If not avoided, the following could result in property damage.
• Misalignment of the fold mirror may cause permanent damage to the product.
1. Set the projector to minimum power.
2. From the Test Pattern menu, select the Integrator Rod test pattern.
3. Loosen the four captive screws securing the optics-side cover and remove it.
4. Unlock the fold mirror screws to unlock the adjustment knobs.
Mirage SST Installation and Setup Guide
020-102956-01 Rev. 1 (06-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
45