Third-Party Products - Christie Mirage SST Installation And Setup Manual

Projection lens
1.63-2.17:1 HB zoom
1.95-3.26:1 HB zoom
1.99-2.71:1 HB zoom
2.71-3.89:1 HB zoom
3.89-5.43:1 HB zoom
4.96-7.69:1 HB zoom
1.13-1.66 UHC zoom
1.45-2.17 UHC zoom
1.95-3.26 UHC zoom
For Installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
• Permanent show installations containing Risk Group 3 laser-illuminated projectors must meet
the following conditions:
• Installed by Christie or by Christie-authorized and trained installers.
Refer to the Laser Illuminated Projector - Class 1 Risk Group 3 Installation training (Course
code: CF-LIPI-01) on the http://www.christieuniversity.com site.
• Performed according to instructions provided by Christie.
• Ensure the projection system is securely mounted or immobilized to prevent unintended
movement or misalignment of the projections.
• The projection room shall be clearly identified by the posting of laser warning and restricted
access signs. The projection room sign must display the warning "Class 1 Risk Group 3 Laser
Controlled Area No Direct Exposure to Beam Shall be Permitted".
• The Christie Laser Projection System Installation Checklist must be fully completed after the
installation and sent to lasercompliance@christiedigital.com. A copy can remain on-site. This
checklist can be found as a separate document in the accessory box with the manual.
• If installing in the US states of Arizona, Florida, Georgia, Illinois, and Massachusetts, go to
www.christiedigital.com for additional regulatory requirements.

Third-party products

This projector is certified to work only with certain specified third-party components. Use only Christie
approved third-party components with the projector. Using non-approved components with the
projector can lead to potential safety hazards and void the projector warranty.
For detailed safety information on third-party components, refer to the product documentation
provided by the manufacturer of the component.
Mirage SST Installation and Setup Guide
020-102956-01 Rev. 1 (06-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Part number
144-105107-XX
144-131106-XX
144-106108-XX
144-107109-XX
144-108100-XX
144-109101-XX
163-118101-XX
163-119102-XX
163-120103-XX
Hazard distance
(m)
2.6
3.8
3.2
4.4
6.1
8.7
1.8
2.1
3.2
Introduction
10