ID
Component
G
Keypad interface
H
Adjustable feet
I
Power switch
J
AC input and lock
K
Light source input
L
Communication and input
panel
M
Rear IR
N
LED status indicator
O
Shutter LED status indicator
P
Air filter side
Mirage SST Installation and Setup Guide
020-102956-01 Rev. 1 (06-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Controls the projector.
Raise or lower these feet when positioning the projector to make sure it
is level on all sides so the displayed image appears rectangular without
any keystone.
Shuts off AC power.
Use this IEC 320-C14 inlet to connect to an appropriately rated power
cord provided for your region and lock it in place.
Receives the input for the light source. Remove the security bracket
before plugging in the light source.
Access to fold mirror, optical zoom/focus, and DMD convergence
adjustments.
Receives transmissions from the IR remote.
Indicates lamp and power status.
Indicates shutter status.
Provides access to the side air filter.
Installation and setup
18