Introduction
This guide provides information for installing and removing projection lenses for the listed projector
models.
The methods for installing and removing lenses differ according to projector model. Ensure you follow
the correct procedures for your specific projector model.
Affected products
The following products are affected:
•
LW551i
•
D Series
•
LX801i
•
LW651i
•
LW751i
•
LWU601i
•
LWU701i
Safety and warning guidelines
Read all safety and warning guidelines before installing or using the lens.
Warning! If not avoided, the following could result in death or serious injury.
•
Do not operate the product after any impact with another object.
•
Do not operate the product without a lens installed.
•
Do not look directly into the lens or at the lamp. The extremely high brightness can cause
permanent eye damage.
•
SHOCK HAZARD! Disconnect the product from AC before moving, servicing, cleaning, removing
components, or opening any enclosure.
•
TIP HAZARD! Do not install a lens without securely mounting the projector first.
Optional Lenses D Series and LW551i Installation and Setup Manual
020-102490-02 Rev. 1 (04-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
4