Disabling Compatibility Mode - Extron electronics IN1804 Series User Manual

Figure 48.
5. Enter Admin or User in the Username field (see figure 48,
6. If required, enter the password in the Password field (
If no password has been set since the unit was delivered, enter the unit serial
•
number. This is usually located on a sticker on the side panel of the unit.
NOTE: The factory configured passwords for all accounts on this device have
If the unit has had an absolute system reset (the ZQQQ SIS command has been
•
entered, see the
password has been removed and no new password has been set, click Sign In to
display the internal web page.
If a new password has been set, enter it and click Sign In.
•
To change the password, see

Disabling Compatibility Mode

The internal web page does not support compatibility mode in Microsoft Internet Explorer.
To check compatibility view settings:
From the Tools menu of the browser, select Compatibility View Settings. The
Compatibility View Settings dialog box opens.
Be sure that the Display all websites in Compatibility View checkbox is clear, and
that the IP address of the switcher is not in the list of websites that have been added to
Compatibility View.
IN1804 DI/DO Sign-in Page
been set to the device serial number. Passwords are case sensitive.
Absolute system reset command
Setting a password
IN1804 Seamless Scaling Switchers • Internal Web Pages
).
1
):
2
on page 77), or if the factory
on page 96.
93