Tcp/Ip Panel - Extron electronics IN1804 Series User Manual

3. Finalize the settings in one of the following ways:
Click the Apply button to accept the changes and return to the Device
•
Discovery panel.
Click the Apply and Connect button to accept the changes and connect to the
•
selected device. A new device configuration tab opens.
Click the Cancel button to cancel any pending changes and return to the Device
•
Discovery panel.

TCP/IP Panel

The TCP/IP panel connects PCS to a specific device through Ethernet.
Figure 38.
1. Click the TCP/IP tab (see figure 38,
2. In the IP Address field (
3. If required, enter the device password in the Password field (
NOTES:
• The factory configured passwords for all accounts on this device have been set to
the device serial number. Passwords are case sensitive.
• Select the Show Characters checkbox (
4. In the Telnet Port field (
5. Click the Connect button (
TCP/IP Panel
1
), enter the IP address of the desired device.
2
), enter the Telnet port of the desired device.
4
). A new device tab opens.
6
IN1804 Seamless Scaling Switchers • Configuration Software
).
).
3
) to display the password characters.
5
85