Extron electronics IN1804 Series User Manual page 62

X2@ = Test patterns
X2^ = Input presets
X2* = Output sync or OSD menu
timeout
X2(
= Front Panel Lockout (executive)
mode status
X3)
= Auto-input switch mode
X3! = Auto-input switching priority
X3@ = Auto-input switch timeout
X3# = Number of characters
IN1804 Seamless Scaling Switchers • SIS Configuration and Control
0
= Off (default)
1
= Crop
2
= Alternating pixels
3
= Crosshatch
4
= Color Bars
5
= Grayscale
6
= Audio test — Crop pattern with orbiting text
TEST
and outputting pink noise at LPCM-2Ch, 48 Hz,
24-bit.
1 128
through
Response is three digits, padded with zeros.
Number of seconds before output sync or the OSD menu
times out.
1 500
through seconds, in 1-second increments
0
= Output sync is instantly disabled with no active video
from the selected input (not allowed for
command).
60 MDUR
= Default for the command.
501
= Output sync never times out (default for SSAV
command).
0
= Off or disabled (front panel controls fully accessible)
(default).
1
= Mode 1 — Complete front panel lockout
2
= Mode 2 — Input switching only
0
= Disabled — Manual switching (default)
1
= User-defined priority mode — The switcher selects
the input to which the user assigns priority. If no
priority is assigned, the switcher selects the active
priority input with the lowest number.
2
= Last connected mode — The switcher selects the
most recently applied input, and retains a history of
the order in which active inputs are connected to the
unit.
If an active input is removed, the switcher switches to
the most recently prioritized input.
Input number for input switching priority.
1
= Input 1
2
= Input 2
3
= Input 3
4
= Input 4
Number of seconds without video that elapse before
switching to the previous input.
1 500
through in 1-second increments
3
= Default
0
= Immediately switch to most recent input if the
current input is removed.
Number of characters in the command being sent.
AUDIO
MDUR
54