Integrated Digital Twisted Pair Extension; Features - Extron electronics IN1804 Series User Manual

Integrated Digital Twisted Pair Extension

The DTP2 inputs and outputs are proprietary signals that are created within any of
the Extron DTP Extender systems and transmitted over a single shielded twisted pair
(STP) cable. The IN1804 accepts DTP inputs from transmitting devices such as the
DTP T USW 333.
NOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for
•
•
All twisted pair models can be integrated into an XTP II matrix switcher system. Additionally,
they can send power to selected DTP or DTP2 endpoints over the same shielded CATx
cable, streamlining system design and installation.
DTP transmitters and receivers are available in compact, low-profile enclosures, plus
decorator-style wallplate and floorbox versions to suit the installation requirements of a
specific application.
RS-232 and IR signal insertion
Bidirectional RS-232 and IR signals can be inserted from a control system and transmitted
over the single shielded CATx cable together with the video and audio, enabling control of
a source or display. The DTP2/XTP/HDBT output on IN1804 DO and IN1804 DI/DO can
be configured for compatibility with HDBaseT-enabled displays to send digital video and
embedded audio, plus bidirectional RS-232 and IR signals up to 330 feet (100 meters) over
a shielded CATx cable.
Matrix switcher integration
In addition to supporting DTP endpoints, the IN1804 twisted pair models can be integrated
into an XTP CrossPoint matrix switcher system. This enables facility-wide AV system
applications with a centralized AV signal distribution infrastructure, as well as several
presentation spaces with local AV switching and processing.

Features

•
•
•
optimal performance.
The IN1804 DI and IN1804 DI/DO can receive signals from remote DTP or DTP2
transmitters at a conference table, lectern, or wall.
The IN1804 DO and IN1804 DI/DO can transmit to a DTP or DTP2 receiver or directly to
an HDBaseT enabled display device.
Integration of DisplayPort, HDMI, and audio sources into presentation
systems — All IN1804 models provide centralized switching for a wide range of AV
sources.
DisplayPort, HDMI, and optional DTP2 inputs —
IN1804 standard and IN1804 DO models feature one DisplayPort and three HDMI
•
inputs.
The IN1804 DI and IN1804 DI/DO feature two HDMI, one DisplayPort, and one
•
DTP2 input.
HDMI and optional DTP2 outputs —
The IN1804 and IN1804 DI models feature dual mirrored HDMI outputs.
•
The IN1804 DO and IN1804 DI/DO feature one DTP2 output and one mirrored
•
HDMI output.
IN1804 Seamless Scaling Switchers • Introduction 2