Using The Menu Screens - Extron electronics IN1804 Series User Manual

Using the Menu Screens

Figure 18.
To open the on-screen menu:
1. Connect a display device to an HDMI output connector (see
on page 10).
2. Press the Menu or Enter button to open the on-screen menu.
To navigate the on-screen menu:
1. Press the
the previous page shows the eight submenus and the items they contain.
2. Press Enter or „ to select a submenu and display its items in the right panel.
3. Press the
selection border to the desired submenu item (see
the example at right).
4. Press Enter to select the item.
5. Press the ƒ button to return to the list of submenus in the left panel.
To adjust the settings of a submenu item:
1. Navigate to an adjustable submenu item and press the Enter or „ button to select the
item.
2. Press the ƒ and „ buttons to adjust the setting or select a specific adjustable setting
within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the
buttons to select a value.
3. Press the Enter button to accept the new value.
NOTE: To cancel a change, press the ƒ button to return to the submenu list (left
column) without pressing Enter. Then, press the
different submenu.
On-screen Menu Example
>
and < buttons to move through the submenus (left) panel. The
>
and < buttons to move the blue
IN1804 Seamless Scaling Switchers • Operation
Rear Panel Connections
table on
> <
and
> <
or button to move to a
24