Extron electronics IN1804 Series User Manual page 67

X8! = Unit name
X8@ = Playback state
X8# = Repeat
X8$ = Playback delay
X8% = Configuration type
X8^ = Number of open connections
X8& = IP address
X8* =
Gateway IP address
X8( = Subnet mask
X9) = Hardware (MAC) address
X9! = Password
X9@ = Default unit name
X9# = Subnet mask in CISG
commands
NOTE: Unless otherwise indicated, commands are not case-sensitive.
IN1804 Seamless Scaling Switchers • SIS Configuration and Control
Unit name — A text string of up to 32 characters.
A-Z 0-9
• , , and the hyphen (
• The first character must be a letter.
• The last character cannot be a hyphen.
• Names are not case sensitive.
• Space or blank characters are not permitted.
0 1
= Stop or stopped
0 1
= No = Yes
NOTE: Setting the repeat mode to
continuous playback causes play to stop after the
end of the current iteration.
Number of seconds to wait before the audio file repeats
X8# 1
(valid only if = [repeat]).
1 300
through (1-300 seconds delay between audio
playbacks)
0
= No delay
0
= IP configuration (ip.cfg)
2
= Unit-specific parameters (box.cfg)
0-<maximum number of open connections>
nnn.nnn.nnn.nnn
Format
192.168.254.254
Default =
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
nnn.nnn.nnn.nnn
Format
0.0.0.0
Default =
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
nnn.nnn.nnn.nnn
Format
255.255.255.0
Default =
Leading zeros in each of the four octets are optional in
setting values, and are suppressed in returned values.
00-05-A6-xx-xx-xx
• Length is 1-128 characters.
• All human-readable characters are allowed except
• The password cannot be a single space.
• Passwords are case-sensitive.
• A user password cannot be assigned if no
administrator password exists. An E14 error code is
returned.
• If the admin password is cleared, the user password
is cleared as well.
Combination of the model name and the last three
hexadecimal character pairs of the unit MAC address
IN1804-DO-15-9E-B0
(Example:
Prefix representing subnet mask bits (subnet mask value
in CISG commands).
/24
Default = , which represents the default subnet mask,
255.255.255.0.
-
) are permitted.
= Play or playing
0
during
|
.
)
59