Positioning The Projector - Christie Crimson Series Installation And Setup Manual

Button Description
F Enter a number, such as menu, item index or value.
G Use the arrows to navigate within a menu or to adjust settings.
H Selects a highlighted menu item and changes or accepts a value.
I Toggles the menus on/off.
J Not supported.
K Opens the keystone dialog.
L Adjusts the lens focus.
M Not supported.
N Displays a test pattern.
O Not supported.
P Optimizes the image automatically.
Q Opens or closes the shutter.
R Not supported.
S Initiates a custom action when a number is selected.
T Selects a projector in multi-projector installations.
U Returns to the previous menu level or exits menus if at the top level.
V Displays context-sensitive help.
W Arrows adjust the lens offset.
X Adjust the lens zoom.
Y Opens the on-screen display position menu.
Z Shows or hides the on-screen display menus.
AA Turns the remote backlight on.
AB Male 3-pin XLR connector for wired option.
AC Lock/unlock the keypad.
AD Battery door.

Positioning the projector

Position the projector in relation to the screen.
For information on positioning the projector in a rigging frame, refer to the Assembling the Precision 1
Rigging Frame (P/N: 020-102719-XX) or Upgrading the Boxer Rigging Frame (P/N: 020-102746-XX)
instruction sheet.
1. Position the projector with the lens perpendicular to the screen.
Keep the projector lens as perpendicular to the screen as possible, even if significantly above
the screen center. When a particularly short throw distance combines with a wide screen, you
Crimson Installation and Setup Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102647-07 Rev. 1 (12-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
21