Installation and setup
Learn how to install, connect, and optimize the projector display.
Site requirements
To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.
Physical operating environment
Provides specifications for the operating environment.
•
Crimson and Mirage HD25/WU25: Ambient temperature (operating) 5 to 40°C (41 to 104°F)
up to 457.2 m (1500 ft)
•
Crimson HD31/WU31: Ambient temperature (operating) 5 to 40°C (41 to 104°F) up to 304.8
m (1000 ft)
•
Humidity (non-condensing) 10 to 80%
•
Operating altitude: 3,000 m (10,000 ft) maximum at 5 to 25°C (41 to 77°F) ambient
Power connection
The projector uses an innovative dual AC inlet power system that offers two power modes.
To operate at full brightness, power the projector using AC Input 1 if the appropriate high power
source is available. To operate in limited power mode, power the projector using standard lower power
sources using AC Input 2. A different power cord is provided for each power source. A 20 A rated wall
breaker is required at the installation when using Input 1. A 15 A rated wall breaker is required at the
installation when using Input 2.
Crimson Installation and Setup Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102647-07 Rev. 1 (12-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
16