Christie Crimson Series Installation And Setup Manual page 29

4. To loosen the three setscrews (B) on the lens mount, use a 5 mm hex driver.
The setscrews must be backed out several turns to avoid contact with the inner lens mount
plate.
5. To fine tune the focus of cross-hair pattern I, adjust the appropriate adjustment screw (A)
until the cross-hair image is in focus with minimal flare.
Crimson Installation and Setup Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102647-07 Rev. 1 (12-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
29