Connecting A Video Source Using Hbmic; Connecting A Video Source Using Tsic - Christie Crimson Series Installation And Setup Manual

Hide thumbs Also See for Crimson Series:

Table of Contents

Connecting a video source using HBMIC

The high bandwidth multi-input card (HBMIC) accepts digital video data from QSFP+, DisplayPort,

HDMI, and 12G, 6G, 3G, and HD SDI sources.

Part number: 144-116109-XX

Enables connection of any one of the input standards, processes it, and routes it to the backplane

interface. The module allows for concurrent processing of HDMI 2.0, DisplayPort 1.2, and SDI inputs

to enable preview capability and fast syncing/switching between inputs. It can also be switched to

Christie Link mode allowing interfacing with the Christie Link transmitter.

Crimson resolutions are limited to HD and WU.

The Terra SDVoE (TSIC) input card accepts digital video data from a Christie Terra Transmitter.

Part number: 144-132107-XX

Enables a connection from an SDVOE source (such as the Christie Terra Transmitter) and routes it to

the backplane interface. Refer to the signal chart for more information about what resolution, frame

rates, and formats are supported based on the projector the card is installed in.

Input configuration Description

One-Port

This card may or may not be included with your model. Standard inputs are subject to change. Refer

to the Crimson and Mirage Specifications Guide (P/N: 020-102724-XX) for more details.

Crimson Installation and Setup Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25

020-102647-07 Rev. 1 (12-2019)

Connecting devices and establishing communication

Enables a connection from an SDVOE source (such as the

Christie Terra Transmitter) and routes it to the backplane

interface. Refer to the signal chart for more information about

what resolution, frame rates, and formats are supported based

on the projector the card is installed in.

Requirements

1 TSIC card

Table of Contents