ANA-7711C/F Installation Guide
Read This First
This chapter is an important guide to the rest of the documentation
and provides a summary of the hardware and software installation
process. Additional chapters describe how to:
Install the adapter
I
Install the driver
I
ANA-7711C/F NAC Adapter Features
The ANA-7711C/F NAC adapter features are summarized below:
Full TCP/IP protocol processing
I
PCI 2.2 compliant; compatible with 3.3-V keyed, 32/64-bit,
I
33/66-MHz PCI/PCI-X slots
Available in two connector configurations:
I
ANA-7711C—Copper connector
I
ANA-7711F—SC fiber connector
I
Supports single processor (UP) and symmetric multiprocessors (SMP)
I
Kit Contents
Your Adaptec ANA-7711 NAC adapter kit includes:
ANA-7711 copper or fiber NAC adapter, shown on
I
ANA-7711C/F NAC Adapter Getting Started Guide
I
NAC Installation CD containing:
I
Operating system drivers
I
README file
I
This Installation Guide
I
Note: You need a Gigabit Ethernet (GbE) copper (CAT 5 or
CAT 6) or SC fiber cable. The cable is not included in the kit.
To order cables, visit Adaptec's online store at
www.adaptecstore.com
1-2
or call 1-800-442-7274.
page
1-3.