Figure 5-3 Setting Up An Environment For Local Uploading/Downloading Using Ftp - H3C SecPath V1000-A Installation Manual

Installation Manual
H3C SecPath V1000-A Security Gateway
files and application programs after passing the authentication. The following
subsections describe the procedures.
Note:
Upload is to transfer files from an FTP client to the security gateway, that is, the put
operation.
Download is to transfer files from the security gateway to an FTP client, that is, the get
operation.
I. Setting up an uploading/downloading environment
Set up a local uploading/downloading environment using FTP
10.110.10.13/24
PC
(FTP Client)

Figure 5-3 Setting up an environment for local uploading/downloading using FTP

Step 1: Connect the PC to an Ethernet interface on the security gateway.
Step 2: Assign an IP address, 10.110.10.10 for example, to the Ethernet interface on
the security gateway.
Step 3: Assign an IP address, 10.110.10.13 for example, to the Ethernet interface on
the PC.
Step 4: Copy the application program/Boot ROM/configuration file to a directory, "C:\
version" for example.
Caution:
The IP addresses assigned to the network interfaces of the PC and the security
gateway must reside on the same network segment.
Set up a remote uploading/downloading environment using FTP
H3C SecPath V1000-A (FTP Server )
LAN
5-9
Chapter 5 Software Maintenance
Ethernet i nterface
10.110. 10.10/24