Chapter 3 Hardware Installation; Installation Procedures; Figure 3-1 Installation Procedure - H3C SecPath V1000-A Installation Manual

Installation Manual
H3C SecPath V1000-A Security Gateway

Chapter 3 Hardware Installation

3.1 Installation Procedures

Install the rack (optional )
Install the Security gateway
Connect the grounding wires
Connect the power cord
Connect the Security
gateway to a terminal for
Verify the installation
Power down the
Security gateway and
remove the power cord
Install the MIM
Connect the Ethernet
Verify the installation
Connect the power cord /

Figure 3-1 Installation procedure

Start
configuration
Power up
NO
Normal ?
YES
interface
Power up
End
Troubleshoot
Power down
3-1
Chapter 3 Hardware Installation