H3C VG Series Configuration Manual
Voice gateways
Hide thumbs
Also See for VG Series:
- Operation manual (31 pages) ,
- Getting started (24 pages) ,
- Command manual (5 pages)
Related Manuals for H3C VG Series
Summary of Contents for H3C VG Series
- Page 1 H3C VG Series Voice Gateways Web-based Configuration Manual Hangzhou Huawei-3Com Technology Co., Ltd. http://www.huawei-3com.com Manual Version: T2-08014H-20060707-C-1.01...
- Page 2 All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou Huawei-3Com Technology Co., Ltd. Trademarks H3C, Aolynk, , IRF, H Care, , Neocean, , TOP G, SecEngine,...
-
Page 3: About This Manual
About This Manual Related Documentation In addition to this manual, each H3C VG Series Voice Gateways documentation set includes the following: Manual Description H3C VG Series Voice Gateways It provides guidelines to user operations on Operation Manual the H3C VG Series Voice Gateways. - Page 4 Convention Description italic Command arguments are in italic. Items (keywords or arguments) in square brackets [ ] are optional. Alternative items are grouped in braces and separated by { x | y | ... } vertical bars. One is selected. Optional alternative items are grouped in square brackets [ x | y | ...
-
Page 5: Table Of Contents
Web-based Configuration Manual H3C VG Series Voice Gateways Table of Contents Table of Contents Chapter 1 Introduction to VG ....................... 1-1 Chapter 2 Getting Started with Configuration................2-1 2.1 Connecting Hardware ......................2-1 2.2 First Login .......................... 2-1 2.3 Interface Introduction ......................2-2 2.3.1 System Information Page.................. -
Page 6: Chapter 1 Introduction To Vg
Chapter 1 Introduction to VG Chapter 1 Introduction to VG H3C VG is a voice gateway device (hereinafter referred to as VG). It is developed by Huawei-3Com Technology Co., Ltd. as a new generation of voice and fax access equipment for various sectors and SOHO (small office and home office). -
Page 7: Chapter 2 Getting Started With Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration Chapter 2 Getting Started with Configuration 2.1 Connecting Hardware For a VG with two Ethernet interfaces: The default IP address of the WAN interface is 192.168.192.1, with a subnet mask of 255.255.255.0. -
Page 8: Interface Introduction
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration Figure 2-1 The language selection interface Select a language, and click <Enter> to enter the configuration page. 2.3 Interface Introduction 2.3.1 System Information Page The system information page displays basic system information about the VG. -
Page 9: List Display Page
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration 2.3.2 List Display Page Figure 2-3 The list display page The list display page consists of three parts: navigation bar, data display area and operation button bar. -
Page 10: Configuration Item Page
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration canceling selection of all the entries. When <Cancel All> is clicked, the button will return to <Select All> automatically. <Del Select>: Deletes the selected data entry (entries). If no data entry is selected, a dialogue box will pop up to prompt you to select a data entry. - Page 11 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration The second one is a column for inputting a value for the property. There are two means available for inputting a property value: direct typing in a text box and selecting from a drop box.
- Page 12 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration Caution: Check the validity of each property value before submission. If an invalid property value is input, the system will display alarm information, and the data will not be submitted for processing.
-
Page 13: Directory Tree
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration 2.3.4 Directory Tree Figure 2-5 Directory tree... -
Page 14: Chapter 3 Web Configuration Of Vg
VG configuration ideas and operation steps in tables. Since the VG has many configuration parameters, this manual only introduces their basic properties. For detailed technical descriptions and configuration examples, refer to H3C VG Series Voice Gateways Operation Manual and H3C VG Series Voice Gateways Command Manual. - Page 15 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Related Step Operation Description Remarks section Select [Voice/VoIP Entity] [Voice/POTS Entity] directory tree, and click <New> to create a voice entity; or select a Configure fax 3.2.6...
-
Page 16: Detailed Web Configuration
Return to section 3.1 “Web Configuration Overview”. Note: The IP address and IP address mask take the dotted decimal format. For configuration details, refer to H3C VG Series Voice Gateways Operation Manual and H3C VG Series Voice Gateways Command Manual. -
Page 17: Interface Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG 3.2.2 Interface Configuration Step Operation Description Remarks Basic configuration Select [IP/IP Address] in the directory tree, click <New>, [Interface Type] [Ethernet], and [Interface Number] to 0 or 1... -
Page 18: Static Route Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks Select [IP/IP Address] in the directory tree, click <New> in the configuration page, set [Interface Type] and [Interface Number], Configure select [sub] as the [IP Address Mode], and secondary then set [IP Address] and [IP Mask] properly. - Page 19 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks The entity number identifies a voice entity uniquely. POTS voice entities and VoIP voice entities are numbered uniformly for easy Configure Required management.
- Page 20 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks The VG can detect and delete mute according to the energy levels of voice signal and silence signal of daily conversations, and will not produce and transmit voice signal until it detects abrupt active sound.
-
Page 21: Voip Voice Entity Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks For fax parameter setting, refer to section Fax Service Optional 3.2.6 “Fax Service Configuration”. Return to section 3.1 “Web Configuration Overview”. 3.2.5 VoIP Voice Entity Configuration... - Page 22 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks This parameter is designed to control the running status of a voice entity. If a voice entity is disabled, it cannot receive a voice call.
- Page 23 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks This function can reduce information exchanged between the calling and called parties before a call is established, thus quickening setup of the call. This function...
-
Page 24: Fax Service Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG 3.2.6 Fax Service Configuration Step Operation Description Remarks Advanced configuration A fax machine that adopts ECM has the error correction function and can provide ARQ (automatic repeat request) and transmit fax packets in the HDLC frame format. - Page 25 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks Local training mode means that the gateways join in the rate training between the fax machines at two ends. In this mode,...
-
Page 26: Voice Subscriber Line Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks The VG supports control on high speed and low speed redundancy packets. Increasing the number of redundancy packets can improve reliability of network transmission... - Page 27 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks Describe the voice subscriber line. Configure Optional Related command: description (voice description subscriber line view). When VAD is enabled for a voice entity, mute...
- Page 28 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks During conversation, your voice is repeated for the line reason and returned to your receiver. This is called echo. The cause is...
-
Page 29: Voice Gk Client Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG 3.2.8 Voice GK Client Configuration Step Operation Description Remarks Basic configuration Select [Voice/GK Client/GK Client Status], Inquire voice and the information of start status and client... -
Page 30: Dial Program Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks The VG can communicate normally with GK Server only after the GK Client function is Configure GK enabled, or it will be unable to set up a... - Page 31 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks A dial terminator is used to notify the VG that the dialing is ended, and the VG should set up Configure a call using the received number.
- Page 32 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks This is the number transform rule that is first Configure applied to the current number transform table. preferred Optional Related command: first-rule (voice number transform tag transform view).
- Page 33 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks Select [Voice/Dial Program/Access Service Number] in the directory tree, and click the Modify button in the <View/Modify> column in access the configuration page to set access service...
-
Page 34: Voice Aaa Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks “Authorization” is to determine what kind of IP call (local, domestic toll, or international toll) a user can place according to the user’s right... - Page 35 Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks You can save call records by setting a Configure maximum number of records. maximum call Optional Related command: cdr buffer (voice AAA records service view).
-
Page 36: Voice Quality Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG 3.2.11 Voice Quality Configuration Step Operation Description Remarks Advanced configuration Select [Voice/Voice Quality] in the directory tree, and set proper voice quality parameters in the configuration page. -
Page 37: Global Property Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Operation Description Remarks This parameter is to configure precedence for all voice IP packets (TOS domain of the IP packets). Configure global packet numeral indicates... -
Page 38: Telnet Login To The Vg
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG II. Configure default voice entity properties For detailed description on the parameters of the default voice entity properties, refer to sections 3.2.4 “POTS Voice Entity Configuration”, 3.2.5 “VoIP Voice Entity... -
Page 39: Login Method Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG Step Configuration item Description Type The VG classifies users into three classes: “administrator”, “operator” and “guest”. An “administrator” has the highest right; an “operator” has a right to view configuration parameters other than “User Management"... -
Page 40: Save Configuration
Web-based Configuration Manual H3C VG Series Voice Gateways Chapter 3 Web Configuration of VG 3.5 Save Configuration After modifying VG configuration through the Web page, you can save the new configuration if you are sure it is correct. Select [Save Configuration] in the directory tree and click <Confirm>...
Need help?
Do you have a question about the VG Series and is the answer not in the manual?
Questions and answers