Table of Contents
Advertisement
Installation Manual
H3C SecPath V1000-A Security Gateway
Chapter 5 Software Maintenance
5.1 Software Maintenance
The security gateway maintains three types of files:
Boot ROM program files
Application program files
Configuration files
The
software
ROM/application program files and uploading/downloading configuration files.
5.1.1 Boot Menu
This section introduces the Boot menu that you use in maintaining the software of the
security gateway.
Set up a configuration environment as shown in Figure 4-1 and then boot the security
gateway. Press <Ctrl+B> when the system prompts "Press Ctrl-B to enter Boot Menu".
The system displays:
Please
Caution:
Press <Ctrl+B> within three seconds after the prompt "Press Ctrl-B to Enter Boot
Menu..." appears to access the Boot Menu. Otherwise, the system starts
decompressing the program.
If you want to access the Boot menu after the system starts decompressing the
program, you need to reboot the security gateway.
Type the correct password and press <Enter>. (If no Boot ROM password is configured,
just press <Enter>.) The system accesses the following Boot menu:
I. Boot menu of the SecPath V1000-A
Boot Menu:
1:
2:
3:
4:
maintenance
input Boot ROM password :
Download application program with XMODEM
Download application program with NET
Display file in flash
Delete file from flash
Chapter 5 Software Maintenance
mainly
involves
upgrading/downloading
5-1
Boot
Advertisement
Table of Contents
Troubleshooting
