Figure 4-4 Setting Communications Parameters; Figure 4-5 Settings Tab - H3C SecPath V1000-A Installation Manual

Installation Manual
H3C SecPath V1000-A Security Gateway

Figure 4-4 Setting communications parameters

Step 6: Click <OK>. The HyperTerminal dialogue box appears.
Step 7: Select Properties.
Step 8: In the Properties dialog box, select the Settings tab, as shown in Figure 4-5.
Step 9: Select VT100 or Auto detect in the Emulation dropdown menu.
Step 10: Click <OK>.

Figure 4-5 Settings tab

Chapter 4 Booting and Configuration
4-3