Replacing An Mim; Figure 6-5 Closing The Chassis Cover - H3C SecPath V1000-A Installation Manual

Installation Manual
H3C SecPath V1000-A Security Gateway
(1) Insert the cover towards this direction
Figure 6-5 Closing the chassis cove
Step 5: Tighten the six captive screws that are removed in steps 3 and 4 described in
the section "6.2 Opening the Chassis Cover" to secure the cover to the chassis body.

6.5 Replacing an MIM

For details, see "Chapter 8 Multifunctional Interface Modules".
(2)
r
6-7
Chapter 6 Hardware Maintenance
(2)
(1)
(2)
(2) Install six screws at these places