Mim; Table 1-6 Attributes Of The Ge Optical Interfaces - H3C SecPath V1000-A Installation Manual

Installation Manual
H3C SecPath V1000-A Security Gateway

Table 1-6 Attributes of the GE optical interfaces

Attribute
Connector
Optical fiber
Max
transmission
segment
Central
wavelength
Transmi
tter
optical
power
Receiver
sensitivity
Operating
mode
Frame format
Note:
When using optical transceivers, select those that have been approved by our
company.
Before performing switchover between electrical/optical interfaces, you need to first
disable the rate and duplex mode configuration in the current mode (electrical or
optical), and then configure the interface after the switchover.

1.2.5 MIM

The SecPath V1000-A provides one extended MIM slot where one of the following
MIMs can be installed:
Multi-mo
de
short-ha medium-ha
ul (850 ul (1310
nm)
SFP/LC
62.5/125
9/125μm
μm
single-mod
multi-mod
e fiber
e fiber
0.55 km 10 km (6.21
(0.34 mi) mi)
850 nm 1310 nm
Min. -9.5 dBm -9 dBm
Max 0 dBm -3 dBm
-17 dBm -20 dBm
1000 Mbps
Full duplex
Ethernet_II
Ethernet_SNAP
Description
Single
Single
mode
mode
short-haul
(1310 nm)
nm)
9/125μm
single-mod
e fiber
40 km
(24.86 mi)
1310 nm
-2 dBm
5 dBm
-23 dBm
1-6
Chapter 1 Product Overview
Single
Single
mode
mode
ultra-long
long-haul
haul (1550
(1550 nm)
nm)
9/125μm 9/125μm
single-mod single-mod
e fiber e fiber
40 km 70
(24.86 mi) (43.5 mi)
1550 nm 1550 nm
-4 dBm -4 dBm
1 dBm 2 dBm
-21 dBm -22 dBm
km