Figure 5-1 Send File Dialog Box; Figure 5-2 Sending File Interface - H3C SecPath V1000-A Installation Manual

Installation Manual
H3C SecPath V1000-A Security Gateway
Note:
The new baud rate takes effect only after you reconnect the terminal emulation
program.
Step 4: Select [Transmit/Send File] in the terminal window. The following dialog box
pops up:

Figure 5-1 Send File dialog box

Step 5: Click <Browse>. Select the application file to be downloaded and set protocol to
XModem. Click <Send>. The following interface pops up:

Figure 5-2 Sending File interface

Step 6: After completing the downloading, the system begins writing data to the Flash,
and then displays the following information in the terminal interface, indicating the
completion of the downloading:
Download completed.
Writing to flash memory...
Please wait, it may take a long time
Chapter 5 Software Maintenance
5-4