Valor L2 1700KN Installation Manual page 41

Installation
Logs and rocks
Each log has pegs to help you locate them on the
platform. Install the logs as shown below.
1. Place the rear log in the center of the fi rebox at the
rear. NOTE: There are two holes for the left peg of
this log.
Natural gas: Place the log's left peg in the front hole.
Propane gas: Place the log's left peg in the rear hole.
Propane
gas
Natural
gas
2. Place the rear left log as indicated.
3. Place the front left log as indicated.
4. Place the right rear log as indicated. Pivot tail end to
just cover small hole located in platform.
5. Place right cross log as indicated. Pivot other end to
locate on the recess of right rear log as indicated,
ensure fi mly located.
Fuel Beds
41