Installation
4. Place the rest of the rocks evenly on the platform
around the burner.
5. Place the fi rst twig #2 at the left hand end of the
burner. Use the bigger rocks to keep the twig off the
shale as much as possible. Be careful not to block
the pilot light.
2
6. Place the fi rst twig #1 as shown. Use the bigger
rocks to keep the twig off the shale as much as
possible.
2
7.
8. Place the second twig #1 as shown. Use the bigger
9. Place the second twig #2 as shown. Use the bigger
1
Place twig #3 as shown, over the center of the
burner. Use the bigger rocks to keep the twig off the
shale as much as possible.
1
rocks to keep the twig off the shale as much as
possible.
3
1
rocks to keep the twig off the shale as much as
possible.
1
Fuel Beds
3
2
45