INSTALLATION MANUAL
1530CIK Clean Install Kit
Use with Valor L1 1500 and 1600 Heater Models ONLY (series K or later)
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
The 1530 Clean Installation Kit installs at the time of
framing the appliance. Wall fi nishes are then applied and
butted directly up to the outer frame.
This kit is not intended to and cannot be installed with
any other trim.
See appliance installation manual for more
information about finishing around this kit.
4008031-03
©2020, Miles Industries Ltd.
L1 Series
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Depth
15/16"
[24 mm]
41" [1041 mm]
INSTALLER: Leave this
manual with the appliance.
CONSUMER: Retain this
manual for future reference.
Note: This kit must be
installed or serviced by a
qualified installer, service
agency or gas supplier. These
instructions are to be used
in conjunction with the main
installation instructions
for the above listed heater
model.
WARNING
HeatShift System IS REQUIRED when
installing the 1530CIK Clean Install Kit.
1500K or 1600K
engine
Left hand
door
Cover
plate
Barrier
screen
Overview
Right
hand door
CIK assembly