Installation
6. Place centre cross log to rear log as indicated. Pivot
tail end so tip is just inside fi replace window line.
7. Any extra vermiculite may be added outside the
burner on the front media platform if desired.
8. Place the rocks as shown below (do not place di-
rectly on the burner).
Long Beach Driftwood Kit installed
42
IMPORTANT: Approved for use only with vermiculite
provided with your Valor fi replace. The use of any
other products may void your fi replace warranty.
WARNING
Choking Hazard! Ensure that the fireplace
area is clear of vermiculite particles as
these could be ingested by small children.
Vacuum area after installation.
Fuel Beds