Fit Appliance Into Framing - Valor L2 1700KN Installation Manual

Installation

Fit Appliance into Framing

1. Remove the 4 screws retaining the engine to its pal-
let.
2. Taking great care not to cut your hands on the sheet
metal edges, lift the appliance out of its packing
base and place it in the framing. Make sure that
the unit is at the right height with consideration to the
height of the hearth or combustible fl ooring.
3. Fold out four mounting tabs and recess the appli-
ance in the framing as shown.
4. Fasten the unit to framing using 4 screws or nails at
the mounting tabs.
Note: The sheet metal front face of the appliance is
fl ush with the framing studs.
front face of
Appliance fl ush to framing
appliance
fl ush
mounting
tabs (4)
Appliance Preparation
31