Table of Contents
Advertisement
Installation
2. Carefully spread the embers by hand, in a single
layer on the surface of burner between the logs.
Do not pile up the embers to avoid blocking the
burner ports.
3. Some embers may be added on the platform to
cover the edge of the burner and the round holes.
4. Spread some splinters to the embers.
Pilot shield
1700SWK—Split Wood Kit installed
NOTE: Ensure the area within the pilot shield is clear
of embers or splinters.
Pilot shield
IMPORTANT: Approved for use only with the ceramic
embers and splinters provided with your Valor fi re-
place. The use of any other products may void your
fi replace warranty.
WARNING
Choking Hazard! Ensure that the fireplace
area is clear of embers / splinters as
these could be ingested by small children.
Vacuum area after installation.
Fuel Beds
49
Advertisement
Table of Contents
