Fuel Beds; Driftwood Kit 1705Dwk - Valor L2 1700KN Installation Manual

Installation

Driftwood Kit 1705DWK

Material required
• Black steel platform (supplied with appliance)
• Driftwood Kit containing:
• 6 logs
• 10 pebbles
• 1 bag of vermiculite
40
Installation
Carefully unpack the kit.
1. Install the steel platform around the burner as
indicated. The openings in the platform should be
underneath.
Installed platform
2. Carefully spread the vermiculite by hand on the
surface of burner, forming a single layer to the
approximate level of the top of the fl ange at the
edge of the burner. Do not pour too much to avoid
blocking the burner ports.
NOTE: Ensure the area within the pilot shield is clear
of vermiculite.

Fuel Beds

Pilot shield