Table of Contents
Advertisement
Appendix B—Remote Control Operation
Modes of Operation
Thermostatic Mode
The room temperature is measured and
compared to the set temperature. The
ame height is automatically adjusted
to achieve the set temperature.
Program Mode
The temperature is controlled by
Programs 1 and 2, each of which can be
set to go on and o at speci c times, at
a set temperature.
Eco Mode
Flame height modulates between high
and low. If the room temperature is
lower than the set temperature, the
ame height stays on high for a longer
period of time. If the room temperature
is higher than the set temperature,
the ame height stays on low for a
longer period of time. One cycle lasts
approximately 20 minutes.
If any of the above modes (Thermostatic, Pro-
gram, or Eco) are engaged by the MyFire app over
WiFi, the handset will display APP.
Manual Mode
The on/o status of the replace, as well as ame
height, are manually controlled by the user.
Thermostatic Mode
On:
Press
PM
temperature displays brie y, followed
by the room temperature.
Setting Desired Temperature:
1. Press and hold
played and set temperature
ashes.
2. To adjust set temperature, press
PM
ON
OFF
3. To con rm, press
Off:
1. Press
2. Press
3. Press
4. Press
PM
Program Mode
On:
Press
, 1 or 2, ON or OFF are displayed.
Off:
1. Press
Mode.
2. Press
3. Press
Note: The set temperature for Thermostatic Mode is
the temperature for the ON time in Program Mode.
Changing the Thermostatic Mode set temperature also
changes the ON time temperature in Program Mode.
Default Settings:
•
ON TIME (Thermostatic) TEMPERATURE: 70°F / 21°C
•
OFF TIME TEMPERATURE: "
. is displayed. Preset
until is dis-
or
.
or wait.
.
or
to go to Manual Mode.
to go to Program Mode.
to go to Eco Mode.
.
,
, or
to go to Manual
to go to Thermostatic Mode.
to go to Eco Mode.
PM
PM
ON
OFF
" (pilot ame only)
69
Advertisement
Table of Contents
