Atx Power Mode; Mounting The System - IEI Technology ITG-100AI User Manual

3.7.2 ATX Power Mode

With the ATX mode selected, the ITG-100AI panel PC goes in a standby mode when it is
turned off. The panel PC can be easily turned on via network or a power switch in standby
mode. Remote power control is perfect for advertising applications since the broadcasting
time for each panel PC can be set individually and controlled remotely. Other possible
application includes:
Security surveillance

Point-of-Sale (POS)

Advertising terminal


3.8 Mounting the System

To mount the ITG-100AI embedded system onto a DIN rail, please follow the steps below.
Step 1: Attach the DIN mount bracket to the rear panel of the ITG-100AI. Secure the
bracket to the ITG-100AI with three supplied retention screws (Figure 3-15).
WARNING:
When installing the DIN mount bracket onto the ITG-100AI, pay special
attention to the direction of the DIN rail mount bracket. See Figure 3-15.
Page 22
ITG-100AI Embedded System