Unpacking; Packing List - IEI Technology ITG-100AI User Manual

2.1 Unpacking

To unpack the embedded system, follow the steps below:
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2:
Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the system out of the boxes.
Step 5:
Remove both polystyrene ends, one from each side.
Step 6: Make sure all the components listed in the packing list are present.

2.2 Packing List

NOTE:
If some of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the ITG-100AI from or contact an IEI sales
representative directly. To contact an IEI sales representative, please
send an email to sales@iei.com.tw.
The ITG-100AI is shipped with the following components:
Quantity Item and Part Number
1 ITG-100AI
Page 8
ITG-100AI Embedded System
Image