Security; Bios Menu 20: Security; Emmc Max Speed [Hs400]; Administrator Password - IEI Technology ITG-100AI User Manual

ITG-100AI Embedded System

Enabled
SCC eMMC Support [Enabled]

Use the SCC eMMC Support option to enable or disable the SCC eMMC support.

Disabled

Enabled

eMMC Max Speed [HS400]


Use eMMC Max Speed option to select the eMMC max speed. The following options are
available:
HS400

HS200

DDR50


4.5 Security

Use the Security menu (BIOS Menu 20) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Main Advanced
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be:
Minimum length
Maximum length

Administrator Password

User Password

Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.

BIOS Menu 20: Security

D Enables the SCC SD card support.
EFAULT
Disables the SCC eMMC support.
D Enables the SCC eMMC support.
EFAULT
Default
Chipset Security
3
20
Boot Save & Exit
Set Setup Administrator
Password
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Page 49