Danfoss VLT AutomationDrive FC 301 Operating Instructions Manual page 32

3 How to Install
3.3.6 Access to Control Terminals
All terminals to the control cables are located underneath the terminal cover
on the front of the frequency converter. Remove the terminal cover with a
screwdriver.
3
Remove front-cover to access control terminals. When replacing the front-
cover, please ensure proper fastening by applying a torque of 2 Nm.
32
Illustration 3.20: Access to control terminals for A2, A3, B3, B4, C3
and C4 enclosures
Illustration 3.21: Access to control terminals for A4, A5, B1, B2, C1
and C2 enclosures
®
MG.33.AG.02 - VLT is a registered Danfoss trademark
®
VLT AutomationDrive FC 300 Operating
Instructions