Danfoss VLT AutomationDrive FC 301 Operating Instructions Manual page 71

®
VLT AutomationDrive FC 300 Operating
Instructions
Parameters for the frequency converter are grouped into various parameter groups for easy selection of the correct parameters for optimized operation
of the frequency converter.
0-** Operation and Display parameters for basic frequency converter settings
1-** Load and Motor parameters, includes all load and motor related parameters
2-** Brake parameters
3-** References and ramping parameters, includes DigiPot function
4-** Limits Warnings, setting of limits and warning parameters
5-** Digital inputs and outputs, includes relay controls
6-** Analog inputs and outputs
7-** Controls, setting parameters for speed and process controls
8-** Communication and option parameters, setting of FC RS485 and FC USB port parameters.
9-** Profibus parameters
10-** DeviceNet and CAN Fieldbus parameters
13-** Smart Logic Control parameters
14-** Special function parameters
15-** Drive information parameters
16-** Read out parameters
17-** Encoder Option parameters
32-** MCO 305 Basic parameters
33-** MCO 305 Advanced parameters
34-** MCO Data Readout parameters
®
MG.33.AG.02 - VLT is a registered Danfoss trademark
4 How to Programme
4
71