Danfoss VLT AutomationDrive FC 301 Operating Instructions Manual page 19

®
VLT AutomationDrive FC 300 Operating
Instructions
3.2.2 Panel Through Mounting
A Panel Through Mount Kit is available for frequency converter series VLT HVAC FC 102, VLT Aqua Drive and VLT AutomationDrive.
In order to increase heatsink cooling and reduce panel depth, the frequency converter may be mounted in a through panel. Furthermore the in-built fan
can then be removed.
The kit is available for enclosures A5 through C2.
NB!
This kit cannot be used with cast front covers. IP21 plastic cover must be used instead.
Information on ordering numbers is found in the
More detailed information is available in the
Design Guide Ordering Numbers.
, section
Panel Through Mount Kit instruction, MI.33.HX.YY,
®
MG.33.AG.02 - VLT is a registered Danfoss trademark
where yy=language code.
3 How to Install
3
19