Operation At Charging; Conditions To Start Charging - Canon MVX200 E Service Manual

3-2 Operation at Charging

3-2-1 Conditions to Start Charging

When the following conditions are satisfied, the MODE MI-COM (IC100) controls the IC 1810 starts charging.
1 Main unit power is turned OFF
DC jack is connected.
2
Power supplied from DC jack
3
UNREG voltage is 8.4 ±0.3 V.
4
Battery temperature is within the range of
5
-6.8°C to 49.3°C.
If the conditions (4) and (5) are not satisfied, a charge error is indicated.
Conditions
MVX250i E, MVX200i E, MVX200 E
Detection
MODE MI-COM
MODE MI-COM pin 71
DC JACK DET
MODE MI-COM pin 80
DC V DET
MODE MI-COM pin 87
BATT.AD
MODE MI-COM pin 88
BATT.INFO
8
TECHNICAL DESCRIPTION
Source of detection
-
DC JACK
DC IN
VTR UNREG.
Battery T terminal