Canon MVX200 E Service Manual page 144

1-31 Disassembly of CVF Unit - 2
(1) Remove two screws (k × 2), and detach the CVF Bottom Cover and the CVF Click Plate.
Note : Disengage the dowel A, and detach the CVF Click Plate while sliding it.
(2) Remove one screw (e × 1), and detach the CVF Click Spring.
(3) Detach the CVF Inner part.
Note : Using tweezers or the like, detach the CVF Inner part while pushing it upward as illustrated below.
(2) - e
CVF Click Spring
(2)
CVF Inner Part
(3)
Note
Pull out
(1)
Tweezers
Push UP
Fig. 38
41
MVX250i E, MVX200i E, MVX200 E
Note
Dowel A
(1) - k
CVF Bottom Cover
e
4mm
Metal
M1.7
(self tap)
DISASSEMBLING
CVF Click Plate
k
2.5mm
Metal
M1.7