Personal Computer Connection Mode (Usb) - Canon MVX200 E Service Manual

5-4 Personal Computer Connection Mode (USB)

IC1001
CCD
/V-DRIVER
Signal flow of (in)
Card camera mode
Signal flow of (in)
Personal computer
connection mode
In the card camera mode, an image signal produced in the camera section is sent to the memory card via the DIGIC DV. In the
personal computer connection mode, the USB terminal and the memory card are connected through the USB controller.
The FR MI-COM performs control of changeover between the card camera mode and the personal computer connection mode.
IC1101
SDRAM
IC1002
Still Picture
TG/CDS
Signal
AGC/AD
Processing
FR
MI-COM
Fig. 15
MVX250i E, MVX200i E, MVX200 E
IC1103
DIGIC DV
USB
CONTROLER
18
TECHNICAL DESCRIPTION
MEMORY
CARD
USB
TERMINAL