Canon MVX200 E Service Manual page 114

<Note on Reassembling>
(1) Reassemble the Lens Shield, Lens Shield B, and FPC Shield Unit as illustrated below.
(Refer to 1-6 : Separation of Front Cover Unit.)
(2) Attach the FPC Shield above the CAV-JACK1 FPC (8 pins) to provide a distance as large as possible. With the MAIN-KEY FPC
folded, it shall not come into direct contact with the CAV-JACK1 FPC.
Note on Reassembling (1)
A Part of Lens Shield
C Part of FPC Shield
Front Cover
Refer to 1-6:Separation of Front Cover Unit.
B Part of Lens Shield
D Part of Lens Shield B
E Part of Lens Shield B
F Part of CVF Unit
Note on Reassembling (2)
MAIN-KEY FPC
FPC Sheld Unit
CAV-JACK1 FPC
Fig. 8
11
MVX250i E, MVX200i E, MVX200 E
DISASSEMBLING
Lug terminal mounting
angle : Within 45.0