Canon MVX200 E Service Manual page 82

PRINTER WARMING UP
• When the printer is getting ready.
PAPER LEVER ERROR
• When the printer's paper lever is not at the correct position.
PRINTER COVER OPEN
• When the printer's cover is open.
NO PRINTHEAD
• When the ink head has not been installed in the printer.
FIRMWARE UPDATED
INCOMPATIBLE PEPAR SIZE
• When an unavailable paper size was selected in the paper size menu after displaying the paper size menu and changing the
settings at the printer side.
CHECK PRINT SETTINGS
• When the printer setting status displays the current recording value and the Easy Direct button was pressed even though this
value cannot be used by PictBridge when the printer is connected.
PRINT ERROR
• When a printer error occurs due to unknown reason.
SEND DESIGNATION ERROR
TOO MANY IMAGES DISCONNECT CABLE
CANNOT TRANSFER!
• When the Easy Direct button was pressed when a motion video was displayed (SET UP icon and the icons to its right gray out,
and the Easy Direct button lights up) while "PC Wallpaper" was set.
MVX250i E, MVX200i E, MVX200 E
GENERAL DESCRIPTION OF PRODUCT
80