Disassembly Of Lcd Hinge Unit - Canon MVX200 E Service Manual

1-27 Disassembly of LCD Hinge Unit

(1) Remove one screw (o × 1), disengage the claws A and B, and detach the Hinge Top Cover, the Hinge Bottom Cover, and the Magnet.
(2) Detach the LCD-KEY FPC from the LCD Hinge Ass'y.
<Note on Reassembling>
(1) When using the service part LCD-KEY FPC, put "1" and "2", "3" and "4", and "5" and "6" on each other in a paired form, and
secure them with the Double Sided Tape on the FPC. Then, fold "7" and "8", and secure them with the Double Sided Tape on the
FPC.
(2) Wind the LCD-KEY FPC 2 and 1/4 turns from the state illustrated below.
(3) Attach the Magnet so that the painted side (black) will be oriented as shown in the figure below.
<Instruction for Supply>
LCD winding part : Hanal FL-778 (DY9-3026-010)
Note on Reassembling (1)
Double Sided Tape
5
Double Sided
6
Tape
1
3
4
2
Fold line
o
9mm
Metal
M1.7
(self tap)
LCD-KEY FPC
Hinge Top Cover
LCD-KEY FPC
Double Sided Tape
7
8
Folded part
Double Sided Tape
Note on Reassembling (2)
(1)
(1)
Paint side (Black)
Fig. 34
MVX250i E, MVX200i E, MVX200 E
Allowable deviation
of attachment from
outline: ±0.5 mm.
Wind 2-1/4 turns
Claw A
Claw B
(2)
Magnet
37
DISASSEMBLING
Instruction for Supply
Hanal
FL-778
(1) - o
(1)
Hinge Bottom Cover
LCD Hinge Ass'y