Separation Of Camera Unit - Canon MVX200 E Service Manual

1-11 Separation of Camera Unit

(1) Remove two screws (j × 1, l × 1), and then detach the Sub Holder and Insulation Rubber.
(2) Remove two screws (l × 2), detach the UL Tape, and disconnect the CN1000 and CN1200. Then, detach the Camera Unit, Ferrite
Core, and Insulation Rubber.
<Note on Reassembling>
(1) With the UL Tape, secure the Ferrite Core to the position indicated in the figure below so that it will not be dislocated.
<Instruction for Supply>
Entire surface of Insulation Rubber : Hanal KS-39M (DY9-3053-000)
Instruction for Supply
Insulation Rubber
Hanal KS-39M
(2) - l
Insulation Rubber
Recorder Unit
Insulation Rubber
(2) - l
Note on Reassembling (1)
(2)
UL Tape (9 × 30)
(2)
CN1000
CN1200
(2)
Camera Unit
Insulation Rubber
Fig. 11
14
MVX250i E, MVX200i E, MVX200 E
Attachment
reference
Ferrite Core
UL Tape (9 × 30)
j
Metal
M1.7
Ferrite Core
(2)
Sub Holder
(1) - j
(1) - l
DISASSEMBLING
Fold the
UL tape.
Rear View
l
2mm
4.5mm
Metal
M1.7
Steped Screw