Camera Section Adjustment; Iris Adjustment; Wb Adjustment (1) - Canon MVX200 E Service Manual

5-4 Camera Section Adjustment

Notes)
(1) Each adjustment data (5-4-1 to 5-4-5) becomes effective after it is written into the DATA as mentioned in 5-4-6. If power must be
turned OFF/ON during each adjustment, be sure to perform the DATA write procedure as mentioned in 5-4-6.
(2) The adjustments from 5-4-2 through 5-4-5 must be carried out in series.
Preparation)
(1) For camera section adjustment, take the product condition.
(2) Adjustment condition (initial condition)
Tape/Card
Program AE
AF
Image stabilizer
Chart

5-4-1 Iris Adjustment

CHART
SPEC. Automatic adjustment.
Procedure)
(1) Referring to the table shown below, adjust the Iris.
ST EP PROCEDURE
IRIS
1 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)

5-4-2 WB Adjustment (1)

CHART Light box (5600°K)
SPEC. Automatic adjustment
Procedure)
(1) Referring to the table shown below, carry out WB adjustment (1).
ST EP PROCEDURE
WB (1)
1 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
Note) In this adjustment, color balance gain data is set to FF. Be sure to carry out color balance adjustment de-
scribed in 5-4-3.
: Tape
: Auto Mode
: OFF
: OFF
: Standard angle of view
MONIT OR
CS Function MD ADDR DT
2 08 ST
WR
↑ ↑
RD
↑ ↑
MONIT OR
CS Function MD ADDR DT
2 08 ST
WR
↑ ↑
RD
↑ ↑
MVX250i E, MVX200i E, MVX200 E
Microcomputer operation
ST
3000 00
Adjustment is in progress.
↑ ↑
05 Adjustment is completed.
↑
Completion with ST :05 (ST :09 NG)
Microcomputer operation
ST
3002 00
Adjustment is in progress.
↑ ↑
05 Adjustment is completed.
↑
Completion with ST :05 (ST :09 NG)
22
SERVICE MODE · ADJUSTMENT