Canon MVX200 E Service Manual page 35

6-11 Other
6-11-1 Consecutive shooting mechanism Can be used starting in Recording Pause or Stop mode, or starting with the power off. This does
6-11-2 Automatic stop function
6-11-3 Power automatic stop function
6-11-4 Time code
6-11-5 World clock display
6-11-6 Speaker
6-11-7 File transfer
a. USB file transfer
b. DV file transfer
6-11-8 Analog / Digital conversion
(PAL models excluded)
6-11-9 Playback zoom
6-11-10 Battery charging function
Charging time
(when power switch is at OFF)
6-11-11 Simultaneous still image
recording
6-11-12 Accessory shoe
6-11-13 Recording lamp
not apply to cases where the cassette has been removed.
When forward still image playback is continued for approx. 5 minutes, or reverse still image
playback is continued for approx. 5 minutes. When a condensation warning is displayed. When
the tape end or beginning is reached.
When Recording Pause continues for approx. 5 min. When the battery voltage falls below a
specified value.
Automatically written during recording. Time code values range from 0:00:00:00 to 7:59:59:24
(hours:minutes:seconds:frames).
Set reference city (city of time clock setting) and select name of city when shooting. Date and
time are automatically adjusted to local date and time, and recorded in data code.
Built-in, volume control provided
Still images (JPEG files) and motion video (Motion JPEG files) recorded on memory cards can
be uploaded to a PC and still images (JPEG files) on the PC can be downloaded to memory cards
in the camcorder by connecting the included IFC-300PCU interface cable between a USB port
on the PC and the USB port of the camcorder.
Still images (JPEG files) and motion video (Motion JPEG files) recorded on memory cards can
be uploaded to a PC and still images (JPEG files) and motion video (Motion JPEG files) on the
PC can be downloaded to memory cards in the camcorder by connecting a CV-150F (or CV-
250F) DV cable between an IEEE1394 port on the PC and the DV terminal of the camcorder.
Converts analog AV signals input to the AV terminal into digital DV signals in real-time and
outputs the digital DV signals from the DV terminal.
When an 8 mm video player or VHS video player is connected with the camcorder using an AV
cable, and the camcorder is connected to a PC using a DV cable, playback images can be trans-
ferred from the 8 mm tape or VHS tape to the PC. (Under the VCR settings on the VCR menu
screen, set AV input ⇒ DV output to ON.)
If the zoom lever is flipped to the tele side during image playback from the tape or card (MVX250i
E only, except for motion video), the image being played back can be enlarged to 5 times its size.
When the zoom lever is flipped to the wide side, the enlarged image is returned to its original
size.
Position of the enlarged section during enlarged screen view can be changed by SET button. (On
the LCD monitor, a frame is displayed to show the zoom-in area, and the direction in which the
area can be moved by the SET button is indicated by
and left/right movement direction settings is performed by pressing the SET button. ("Left /
right" is the default setting when the mode is transferred to zoom-in.)
When the CA-570 Canon compact power adapter is connected, the battery pack installed in the
battery pack compartment can be charged. (During charging, the charge lamp flashes (one flash
with a charge level of 0% to 50%, and two flashes with a charge level of more than 50%) or it
lights (when the charging is complete with a charge level of 97% or more)).
NB-2L : Approx. 110 min., NB-2LH : Approx. 115 min.,
BP-2L12 : Approx. 180 min., BP-2L14 : Approx. 210 min.
If the photo button is pressed while motion video is recorded to tape, still images
(image size : 640 × 480, image quality : Selectable from Fine or Normal) can be recorded on the
memory card.
Support for advanced accessory shoe (MVX250i E model), No support for advanced accessory
shoe (MVX200i E, MVX200 E model)
None
33
MVX250i E, MVX200i E, MVX200 E
GENERAL DESCRIPTION OF PRODUCT
/ .) Toggling between the up/down