Canon MVX200 E Service Manual page 28

6-2-2 Audio Dubbing signal input
6-2-3 Switching to Audio Dubbing
6-3 Playback functions
6-3-1 Standard Playback
a. Video
b. Audio 16-bit
12-bit
6-3-2 Special Playback
a. Still image playback
b. Fast-forward playback
c. Rewind playback
d. Frame playback
e. Slow playback
f. 1× SP playback
g. 2× SP playback
6-4 Tape fast-forward / rewind time
6-5 Search
6-5-1 Date search
6-5-4 Index search
6-5-5 End search
6-6 Input signals
6-6-1 DV terminal
6-6-2 AV terminal
a. Video signals
Types of signals
Impedance
Signal level
b. Audio signals
Types of signals
Impedance
Signal level
6-6-3 S Video terminal
Signal configuration
Impedance
Signal level
6-6-4 Microphone terminal
6-6-5 USB terminal
6-7 Output signals (MVX250i E only)
6-7-1 DV terminal
6-7-2 AV terminal
a. Video signals
Types of signals
Impedance
Signal level
Horizontal resolution
Self-recording/playback
Camera EE OUT
Audio signal from LINE (AV terminal) or microphone (external > internal). MVX200i E has no
external microphone terminal. MVX200 E has no external microphone terminal and line in
function.
Press audio dubbing button on remote control while playback is paused.
Standard Playback and Superb Playback
Video recorded in SP and LP modes
Supports the following sampling frequencies : 48 kHz, 44.1 kHz, 32 kHz.
Sampling frequency : 32 kHz
Stereo 1, Stereo 2, or mixed playback of Stereo 1 and Stereo 2 (variable mix ratio)
Plays video only
Pure frame playback
Approx. 11.5× speed.
Approx. 11.5× speed.
Forward/reverse frame feeding
Forward/reverse 1/3× speed
Forward/reverse 1× speed
Forward/reverse 2× speed
Approx. 2 minutes and 20 seconds (using 60-minute tape)
If there is more than one recording date, this function cue up to the position where the date
changes. Forward/reverse date search (use the
ing Date search with the remote control Search Select key)
Search can be set for up to 10 images before or after the current position.
None
When a tape is played back upon completion of the shooting, this function transports the tape to
the position where the shooting last ended, it cues to the end of the shooting on the tape, and then
places the tape in the stop mode. Furthermore, when an end search is being performed, the tape
is played back starting about 4 seconds before the end of the shooting, enabling the image imme-
diately before the end to be checked. However, this function does not work when the tape has
been removed after shooting.
SD format signals complying with IEEE1394– AV / C protocol (MVX250i E, MVX200i E only)
(MVX250i E, MVX200i E only)
PAL standard color video signals
75 Ω
1Vp-p (composite)
Stereo audio signals
Min. 40 kΩ
−10dBv
(MVX250i E, MVX200i E only)
PAL Y/C separated video signal
75 Ω
0.3Vp-p (color burst signal)
Included. (MVX250i E only)
Supports USB 2.0 FullSpeed class.
SD format signals complying with IEEE1394-AV/C protocol
PAL standard color video signals
75 Ω
1 Vp-p (composite)
Approx. 530 TV lines (screen center)
Max. approx. 530 TV lines (screen center)
26
MVX250i E, MVX200i E, MVX200 E
GENERAL DESCRIPTION OF PRODUCT
/ keys on the remote control after select-